Aero-structural investigation of biplane wind turbine blades

TitleAero-structural investigation of biplane wind turbine blades
Publication TypeJournal Article
Year of Publication2014
AuthorsRoth-Johnson, Perry, and Richard E. Wirz
JournalWind Energy
Volume17
Issue3
Pagination397-411
Date Published12/2012
Type of ArticleResearch Article
ISSN10954244
Keywordsbiplane, blade design, computational fluid dynamics, finite element analysis, inboard region, parametric analysis
AbstractAs wind turbines grow larger, loads increase dramatically, particularly in the inboard region of the blade. A key problem is to design a strong inboard region that supports these loads without sacrificing too much aerodynamic performance. A new design is proposed: a biplane inboard region that transitions into a joint, which connects to a monoplane outboard region. The objective is to develop biplane inboard configurations that improve the aero-structural performance of blades. To approximately compare a conventional inboard region with a biplane inboard region, cross-sectional properties of a thick monoplane and a biplane were measured. Numerical simulations were used to explicitly compare the aerodynamic performance of a thick monoplane to a biplane. Then, several model beams were designed to be simple approximations of a conventional blade ("monoplane beam") and the biplane blade ("biplane beam"). Canonical bending loads were applied to each model beam and their deflections were compared. Numerical simulations show that the lift-to-drag ratio is significantly greater for the biplane than the thick monoplane for 0-15.5 degrees angle of attack. A parametric analysis of biplane beam configurations shows that their tip deflections are smaller than monoplane beams of the same length. These benefits for the inboard region of (1) improved aerodynamics and (2) improved strength could lead to weight reductions in wind turbine blades. Innovations that create lighter blades can make large blades a reality. These results suggest that the biplane blade is an attractive design for large blades.
URLhttp://doi.wiley.com/10.1002/we.1583
DOI10.1002/we.1583
Refereed DesignationRefereed

Download File (pdf)

This publication may be downloaded for personal use only. Any other use requires prior permission of the authors and publisher.